Home
Instruction manual
Detailed description of the start-up and operation of the hardware and the WebUI.
SKM
Using the SKM COM

Instruction manual
Detailed description of the start-up and operation of the hardware and the WebUI.
- Base Station
- WebUI
  Detailed description of the WebUI navigation and configuration.
- SEK
- SKM
  - Product overview
  - Inserting and removing the rechargeable battery
    The handheld transmitter is powered exclusively by the BA 70 battery (separate accessory).
  - Replace microphone module
    Different microphone modules are available for the handheld transmitter.
  - Attaching the SKM COM
    The SKM COM with the push button adds additional functions to the SKM.
  - Meaning of the LED
    The LED on the bottom of the SKM can display the following information.
  - Switching the SKM on and off
  - Information on the display
    You can view the following information on the SKMs display.
  - Pairing the SKM to the Base Station
  - Using the SKM COM
  - Updating the SKM
    You can update the firmware of the SKM via Spectera WebUI.
- DAD
- CHG 70N-C charger
  The CHG 70N-C is a network enabled charger featuring two individual charging bays.
- L 70 USB charger
- Modular L 6000 charger
  These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
- Cleaning and maintenance
  Note the following information when cleaning and maintaining products of the Spectera series.

Using the SKM COM

1 Push button with LED

You can set the function of the COM button in the WebUI (see Setting the command mode) for each selected audio output channel on the Base Station.

Momentary
Latching

The colors of the LED can be set in the WebUI.