Home
Instruction manual
Detailed description of the start-up and operation of the hardware and the WebUI.
SKM
Pairing the SKM to the Base Station

Instruction manual
Detailed description of the start-up and operation of the hardware and the WebUI.
- Base Station
- WebUI
  Detailed description of the WebUI navigation and configuration.
- SEK
- SKM
  - Product overview
  - Inserting and removing the rechargeable battery
    The handheld transmitter is powered exclusively by the BA 70 battery (separate accessory).
  - Replace microphone module
    Different microphone modules are available for the handheld transmitter.
  - Attaching the SKM COM
    The SKM COM with the push button adds additional functions to the SKM.
  - Meaning of the LED
    The LED on the bottom of the SKM can display the following information.
  - Switching the SKM on and off
  - Information on the display
    You can view the following information on the SKMs display.
  - Pairing the SKM to the Base Station
  - Using the SKM COM
  - Updating the SKM
    You can update the firmware of the SKM via Spectera WebUI.
- DAD
- CHG 70N-C charger
  The CHG 70N-C is a network enabled charger featuring two individual charging bays.
- L 70 USB charger
- Modular L 6000 charger
  These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
- Cleaning and maintenance
  Note the following information when cleaning and maintaining products of the Spectera series.

Pairing the SKM to the Base Station

Mobile devices can only be paired and operated with one Base Station at a time.

You can pair up to 128 mobile devices to a Base Station within one RF channel.

Please make sure that on the Base Station

a RF channel is configured and
this RF channel is activated (RF on).

To pair the SKM to a Base Station:

Put the Base Station into Pairing Mode using Spectera WebUI.
The LED flashes blue.

Pairing Mode is activated for five minutes. The audio signal is not interrupted.
While the SKM is off, long-press the ON/OFF button until the Status LED is blue.
The status LED is flashing blue while searching for a new Base Station.
When the SKM found the Base Station, the status LED is flashing blue quickly and then is blue.

The SKM appears in the software.
Confirm the pairing in the software, see Spectera WebUI: Pairing/unpairing mobile devices.
The status LED of the SKM is flashing green quickly while connecting. When connecting is completed, the status LED is green.

To unpair the SKM from a Base Station:

The SKM can only be unpaired in Spectera WebUI.
- Spectera WebUI: Pairing/unpairing mobile devices
The SKM will automatically switch to pairing mode. The status LED is flashing blue.

The SKM has been paired to a Base Station.