Home
User Manual
Starting up and operating devices of the XSW IEM line.
XSW IEM EK bodypack receiver
Setting options in the menu
Setting the high boost / equalizer
Under the equalizer menu item, you can adjust the treble boost of the output signal.

User Manual
Starting up and operating devices of the XSW IEM line.
- XSW IEM EK bodypack receiver
  - Product overview
  - Inserting and removing the batteries/rechargeable batteries
    You can use the receiver with batteries (AA, 1.5 V).
  - Connecting earphones
  - Attaching the receiver to your clothing
  - Replacing the belt clip
  - Switching the receiver on and off
  - LED indicators
  - Display on the display panel
  - Battery status
    You can see the current charging status of the batteries on the receiver’s display panel.
  - Buttons for navigating the menu
  - Finding an interference-free frequency (frequency test)
  - Performing a soundcheck
  - Setting options in the menu
    - Setting the frequency bank on the receiver
      You can set the frequency bank under the frequency bank menu item.
    - Setting the frequency channel on the receiver
      You can set the channel under the frequency channel menu item.
    - Setting the frequency on the receiver
      You can set the receiving frequency manually under the frequency menu item.
    - Setting the limiter (LIM)
      Under the limiter menu item, you can adjust the volume of the PHONES headphones output.
    - Setting the high boost / equalizer
      Under the equalizer menu item, you can adjust the treble boost of the output signal.
    - Setting the FOCUS
      In stereo mode, the FOCUS function controls the signal received from the transmitter at the receiver.
    - Panorama setting
      In the PAN menu item, you can control the volume distribution of an audio signal over two channels.
- XSW IEM SR stereo transmitter
- Establishing a radio link
- Synchronizing devices
- Cleaning and Care

Setting the high boost / equalizer

Under the equalizer menu item, you can adjust the treble boost of the output signal.

Setting range:

10 dB at 13 kHz

Values:

To switch the equalizer on or off:

Press the SET button repeatedly until the EG display flashes.
Press the UP or DOWN button to change the set values.
Press the SET button
- briefly to temporarily save the settings and move to the next menu item
- for two seconds to immediately save the changes and exit the menu