Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
WebUI
Detailed description of the WebUI navigation and configuration.
Configuration
Under Configuration, you can set the essential settings for the RF channel, antenna, Base Station and mobile devices.
Base Station
Here, you can check the basic settings of the Base Station and easily perform tasks such as firmware updates, walk tests, or restoring it to factory settings.
Saving/loading audio settings
You can save your audio settings and load them at a later time.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
  - Get started
    Starting the WebUI for the first time, including device authentication and license entitlement.
  - Resetting the device password
    You can reset the assigned device password on your Base Station to its factory settings.
  - Basic configuration
    Start your basic configuration with the recommended steps.
  - Configuration
    Under Configuration, you can set the essential settings for the RF channel, antenna, Base Station and mobile devices.
    - RF configuration
      Here you can set up your RF channel and check the status of local permissions, your connected antenna, and any potential frequency interference in the surrounding area.
    - Base Station
      Here, you can check the basic settings of the Base Station and easily perform tasks such as firmware updates, walk tests, or restoring it to factory settings.
      - Changing the device name
        You can change the device name for your Base Station.
      - Updating the firmware (Base Station)
        The firmware version of the Base Station can be downloaded and updated manually.
      - Updating the firmware (mobile devices)
        The update of the firmware version of mobile devices can be initiated using the Update button.
      - Resetting the Base Station
        You can reset the Base Station to the factory settings remotely.
      - Pairing/unpairing mobile devices
        In the WebUI, you can pair up to 128 mobile devices to a Base Station within one RF channel.
      - Identifying the Base Station
        You can remotely identify your Base Station.
      - Saving/loading audio settings
        You can save your audio settings and load them at a later time.
      - Performing a walk test
        A walk test allows you to check the reception quality of your radio links within the operating environment.
    - Audio interfaces
      Here you can monitor all available interfaces and manage the outputs.
    - Mobile Devices
      Here you can configure specific settings for mobile devices.
    - Activating a license (webUI)
      Under Entitlement, you can enter and activate the current license for the frequency spectrum.
  - Frequency Scan
    You can use an RF scan to examine the current frequency situation of your connected antenna.
  - Audio levels
    Under Audio Levels you can monitor all interfaces at a glance.
  - Audio inputs and outputs
    Here you have an overview of all channels at a glance and can assign the audio network input and output for the link channels directly and easily.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.

Saving/loading audio settings

You can save your audio settings and load them at a later time.

In order to apply the audio settings, a familiar ID of the previously assigned mobile device is expected in connection with the hardware configuration of the Base Station described in this document. Unknown IDs of the mobile device or unknown hardware configurations will result in the settings not being accepted successfully.

The audio settings can be exported in a .json file.

To save your audio settings:

In the top bar, navigate to Configuration > Base Station.
Under Settings click on Save.
Your audio settings have been exported as a .json file.

To load your saved audio settings:

In the top bar, navigate to Configuration > Base Station.
Under Settings click on Load.
A new upload window opens.
Select your saved file and click on Open.
Your audio settings file has been successfully loaded.

The audio settings have been successfully saved/loaded.