Home
Instruction manual
Starting up and operating devices of the Digital 6000 line.
SK 6000 bodypack transmitter
These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
Displays on the SK 6000 bodypack transmitter display panel
You can view the following information on the transmitter display.

Instruction manual
Starting up and operating devices of the Digital 6000 line.
- EM 6000 2-channel receiver
  These sections contain information about installing, starting up and operating the EM 6000 2-channel receiver.
- SKM 6000 handheld transmitter
  These sections contain information about installing, starting up and operating the SKM 6000 handheld transmitter.
- SK 6000 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
  - Product overview
  - Inserting and removing the BA 61 rechargeable battery
  - Inserting and removing the B 61 battery compartment
  - Mounting the antenna
  - Connecting a microphone
  - Connecting an instrument or line source
    You can connect instruments or audio sources with a line level to the SK 6000 bodypack transmitter.
  - Connecting a command adapter
  - Switching the SK 6000 on and off
  - Displays on the SK 6000 bodypack transmitter display panel
    You can view the following information on the transmitter display.
  - Operating the menu of the SK 6000 bodypack transmitter
    Navigating through the menu and making changes.
  - Operating the SK 6000 with a command adapter
    You can use the command adapter to switch the audio channel on the EM 6000 receiver via remote control.
  - Updating the transmitter firmware
- SK 6212 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6212 bodypack transmitter.
- Modular L 6000 charger
  These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
- L 70 USB charger
- Establishing a radio link
  Note the following points when you establish a radio link between the transmitter and receiver.
- Synchronizing devices
- Cleaning and maintenance
  Note the following information when cleaning and maintaining Digital 6000 series products.

Displays on the SK 6000 bodypack transmitter display panel

You can view the following information on the transmitter display.

Remaining battery life

Shows the remaining battery life and the transmitter operating time.

The time is displayed only if the BA 61 rechargeable battery is used.

For normal batteries, only the charge level of the batteries is displayed without time information.

For more information about rechargeable batteries and batteries, see Rechargeable batteries and battery compartments.

Frequency

Shows the set frequency.

Alternatively, the name of the radio link can also be displayed here.

See Operating the menu of the SK 6000 bodypack transmitter

Encryption

The radio link between the receiver and transmitter is secured with AES 256 encryption.

The encryption can be set only on the receiver, not on the transmitter.

See Encrypting the radio link

Lock-off function

The lock-off is activated on the transmitter.

See Operating the menu of the SK 6000 bodypack transmitter

Transmission mode (LR/LD)

The standard transmission mode of the transmitters in the Digital 6000 series is Long Range mode (LR). As a result, the transmitters in the Digital 6000 series are compatible with EM 9046 and EK 6042 if they are operated in Long Range mode.

If required, Link Density mode (LD) can be activated in the menu of the EM 6000 (see System -> Transmission Mode menu item) in order to accommodate even more channels in the available frequency spectrum.

For more detailed information about Link Density mode, see Link Density Mode.