Home
Instruction manual
Starting up and operating devices of the 2000 IEM series.
Stereo transmitter SR 2000 IEM | SR 2050 IEM
Buttons for navigating the transmitter menu
Navigating through the menu

Instruction manual
Starting up and operating devices of the 2000 IEM series.
- Stereo diversity receiver EK 2000 IEM
- Stereo transmitter SR 2000 IEM | SR 2050 IEM
  - Product overview
  - Connecting/disconnecting the transmitter with/from the power supply
  - Creating a data network
    You can monitor and control one or more SR 2000 IEM / SR 2050 IEM transmitters via a network connection using Sennheiser Wireless Systems Manager (WSM) software.
  - Connecting audio signals
    You can connect Mono or Stereo signals via the two input sockets BAL AF IN L(I) and BAL AF IN R(II).
  - Daisy chaining audio signals
  - Connecting antennas
  - Mounting the transmitter into a rack
  - Switching the transmitter on and off
  - Using the headphone output
  - Configuring the audio channels (mono/stereo)
  - Deactivating the RF signal (RF mute)
  - Lock-off function
  - Displays on the transmitter display panel
    You can view the following information on the transmitter display.
  - Buttons for navigating the transmitter menu
    Navigating through the menu
  - Setting options in the menu
    In the SR 2000 IEM / SR 2050 IEM menu, you can configure the following settings.
- Antenna Combiner AC 3200-II
- Establishing a radio link
- Synchronizing devices
  You can synchronize the 2000 IEM series transmitters and receivers via the transmitter’s and receiver’s infrared interfaces.
- Cleaning and maintenance

Buttons for navigating the transmitter menu

Navigating through the menu

To open the menu:

Press the jog dial.
The operating menu is shown on the transmitter display panel.

To open a menu item:

Turn the jog dial to navigate through the individual menu items.
Press the jog dial to open the selected menu item.

Making changes in a menu item

After you open a menu item, you can make changes as follows:

Turn the jog dial to set the displayed value.
Press the jog dial to save your setting.
Press the ESC button to leave the menu item without saving the setting.