Selecting the frequency channel on the transmitter

In this menu item, you can select the transmission channel.

Before using the device, check whether there are interfering frequencies in your frequency range (Finding an interference-free frequency (frequency test)) and then carry out a soundcheck (Performing a soundcheck).


To select the transmission channel:
  1. Press the UP or DOWN button to access the SET menu.
  2. Press the SET button to open the channel menu (CH).
    The setting for the selected menu flashes.
  3. Press the UP or DOWN button to change the set values.
  4. Press the SET button twice to save the settings you made.
To exit the menu:
  1. Press STANDBY to exit the menu.