Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
LinkDesk
Detailed description of the installation, start-up and operation of the LinkDesk software.
Basic configuration
Start your basic configuration with the recommended steps.
Adding Base Station
To add a Base Station, you must identify it via its IP address, authenticate it with a password, and activate its license.
Identifying Base Station via IP
In order to add a Base Station, its IP address is required.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.
  - Get started
  - Basic configuration
    Start your basic configuration with the recommended steps.
    - Creating new productions
      With productions, you can create a virtual workplace to plan, manage and monitor your real devices for the upcoming event.
    - Adding Base Station
      To add a Base Station, you must identify it via its IP address, authenticate it with a password, and activate its license.
      - Identifying Base Station via IP
        In order to add a Base Station, its IP address is required.
      - Claiming single device (LinkDesk)
        Instructions for claiming a single device in Sennheiser LinkDesk.
      - Activating a license (LinkDesk)
        Here you will learn how to activate your region-specific license for your Base Station.
    - Activating antennas
      Antennas connected to a Base Station must be selected and activated before use.
    - Scanning the RF spectrum
      You can use an RF scan to examine the current frequency situation of your connected antenna.
    - Adding RF channels
      You can configure an RF channel and assign it to the available devices.
    - Pairing/unpairing mobile devices
      In LinkDesk you can pair up to 128 mobile devices to a Base Station within one RF channel.
  - Productions
    In this chapter you will learn the basic information about productions.
  - Base Station
    The Base Station is the central hardware for managing and monitoring all compatible Spectera products.
  - Mobile devices
  - Routing editor
    The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
  - Error Handling
    Summary of the typical error messages that can occur and how to resolve them.

Identifying Base Station via IP

In order to add a Base Station, its IP address is required.

You can read the IP address on the display of the device.

To identify the IP of your Base Station:

On the Base Station, rotate the jog-dial and navigate to the menu Network.
Press the jog-dial to enter the menu.
The network data will be displayed.
Note the displayed IP of your device.

The IP address of your Base Station has been identified.