Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
LinkDesk
Detailed description of the installation, start-up and operation of the LinkDesk software.
Basic configuration
Start your basic configuration with the recommended steps.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.
  - Get started
  - Basic configuration
    Start your basic configuration with the recommended steps.
    - Creating new productions
      With productions, you can create a virtual workplace to plan, manage and monitor your real devices for the upcoming event.
    - Adding Base Station
      To add a Base Station, you must identify it via its IP address, authenticate it with a password, and activate its license.
    - Activating antennas
      Antennas connected to a Base Station must be selected and activated before use.
    - Scanning the RF spectrum
      You can use an RF scan to examine the current frequency situation of your connected antenna.
    - Adding RF channels
      You can configure an RF channel and assign it to the available devices.
    - Pairing/unpairing mobile devices
      In LinkDesk you can pair up to 128 mobile devices to a Base Station within one RF channel.
  - Productions
    In this chapter you will learn the basic information about productions.
  - Base Station
    The Base Station is the central hardware for managing and monitoring all compatible Spectera products.
  - Mobile devices
  - Routing editor
    The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
  - Error Handling
    Summary of the typical error messages that can occur and how to resolve them.

Basic configuration

Start your basic configuration with the recommended steps.

For an initial setup, we recommend following these first steps to successfully configure the system from the outset: