Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
LinkDesk
Detailed description of the installation, start-up and operation of the LinkDesk software.
Mobile devices
Adding mobile devices
You can add mobile devices to your connected Base Station.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Network & Security Guide
  This document is intended for IT administrators, system integrators and event technicians and serves as an planning and configuration guide for integrating components of the Spectera offering into diverse network environments from small home networks up to enterprise networks.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.
  - Get started
  - Basic configuration
    Start your basic configuration with the recommended steps.
  - Productions
    In this chapter you will learn the basic information about productions.
  - Base Station
    The Base Station is the central hardware for managing and monitoring all compatible Spectera products.
  - Mobile devices
    - Pairing/unpairing mobile devices
      In LinkDesk you can pair up to 128 mobile devices to a Base Station within one RF channel.
    - Adding mobile devices
      You can add mobile devices to your connected Base Station.
    - Displaying device information
      You can display detailed information relating to your Spectera device.
    - Changing device name
      You can change the device name for your mobile device.
    - Configuring IEM/IFB input
      You can adjust the BALANCE and VOLUME of the IEM/IFB input.
    - Configuring MIC/LINE output
      You can adjust the PREAMP GAIN and LOW CUT of the Output MIC/ LINE.
    - Removing mobile device
      You can remove your mobile devices from your current production.
    - Updating firmware (mobile devices)
      The firmware version of the mobile devices can be downloaded and updated manually.
  - Routing Editor
    The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
  - Error handling
    Summary of the typical error messages that can occur and how to resolve them.

Adding mobile devices

You can add mobile devices to your connected Base Station.

When adding mobile devices for the first time, they need to be paired. Devices that have already been paired and removed will be displayed in the MD Manager and can easily be added back to production using the button.

To add a mobile device:

In your production card, activate the function DEVICE SYNCHRONIZATION on the left-hand side of the top bar.
Click on the button MD Manager on the left-hand side of the top bar.
A new window opens and shows a list of all known and connected mobile devices.
Click on PAIRING MODE to set the Base Station to pairing mode.
The Base Station remains in pairing status for 5 minutes.
Switch on your mobile device and activate the Pairing Mode if it has not been activated automatically (Switching the SEK on and off, Pairing the SEK to the Base Station).
After a few seconds, the available mobile devices are displayed in the list.
Click on the Add button in the line of the mobile device to be added.
A confirmation code is displayed both in LinkDesk and on the mobile device.
Compare the displayed code at both endpoints.
In LinkDesk, click on Confirm to pair the selected mobile device.

The mobile device has been added to the Base Station and is indicated as a separate card. The card shows the connected Base Station and the occupied RF channel. The device state color changes to:

green: successful operation, or
yellow: warning (e.g. if the audio links have not yet been assigned (see also Device State Colors and Routing Editor).