Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
WebUI
Detailed description of the WebUI navigation and configuration.
Get started
Starting the WebUI for the first time, including device authentication and license entitlement.
Claiming single device (WebUI)
Instructions for claiming a single device in Spectera WebUI.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
  - Get started
    Starting the WebUI for the first time, including device authentication and license entitlement.
    - Identifying Base Station via IP
      In order to add a Base Station, its IP address is required.
    - Claiming single device (WebUI)
      Instructions for claiming a single device in Spectera WebUI.
    - Activating a license (webUI)
      Under Entitlement, you can enter and activate the current license for the frequency spectrum.
  - Resetting the device password
    You can reset the assigned device password on your Base Station to its factory settings.
  - Basic configuration
    Start your basic configuration with the recommended steps.
  - Configuration
    Under Configuration, you can set the essential settings for the RF channel, antenna, Base Station and mobile devices.
  - Frequency Scan
    You can use an RF scan to examine the current frequency situation of your connected antenna.
  - Audio levels
    Under Audio Levels you can monitor all interfaces at a glance.
  - Audio inputs and outputs
    Here you have an overview of all channels at a glance and can assign the audio network input and output for the link channels directly and easily.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.

Claiming single device (WebUI)

Instructions for claiming a single device in Spectera WebUI.

To claim your Base Station:

Depending on the firmware version, enter the following URL into your browser:
- Firmware 0.8.x: https://deviceIP/specteracontrol/index.html
- Firmware ≥1.0.0: https://deviceIP/specterawebui/index.html
  
  Since the certificate is unknown to your browser, a security warning is displayed the first time you run the application. The security warning depends on the browser you are using.
Depending on your browser, click on Advanced and then on:
- Continue to localhost (unsafe) (Microsoft Edge)
- Proceed to localhost (unsafe) (Google Chrome)
- Accept the Risk and Continue (Firefox)
- or similar (other browsers).
The WebUI displays the following options depending on the state of the device:
- If the device is in a factory default state and the original password is still assigned, it will be automatically detected and applied. Next, a new password has to be set:
- If the device was previously claimed by another Sennheiser LinkDesk or Spectera WebUI instance, the previously set password must be entered:
  
  If you cannot remember the previously set password, please perform a factory reset of the device. After the reset, the default password for Spectera will be automatically applied by the software.
Set a new device password (if you are logging in for the first time) or enter the password you have already assigned for authentication (if you have already logged in).
Click on Submit.

Your Base Station has been claimed successfully.