To connect the receiver to the power supply system:
-
Connect the mains cable IEC connector to the power socket on the rear side of the receiver.
-
Connect the wall plug on the mains cable to a suitable wall outlet.

If the booster voltage for antennas is activated in the menu (see
System -> This Device menu item), it is active already before you switch on and after you switch off the receiver.
To completely disconnect the receiver from the power supply system:
-
Unplug the mains cable plug from the wall socket.
-
Slide the red switch back and simultaneously unplug the IEC connector of the mains cable from the power socket of the receiver.