Home
Instruction manual
Starting up and operating devices of the Digital 6000 line.
SK 6212 bodypack transmitter
These sections contain information about installing, starting up and operating the SK 6212 bodypack transmitter.
Inserting and removing the BA 62 rechargeable battery

Instruction manual
Starting up and operating devices of the Digital 6000 line.
- EM 6000 2-channel receiver
  These sections contain information about installing, starting up and operating the EM 6000 2-channel receiver.
- SKM 6000 handheld transmitter
  These sections contain information about installing, starting up and operating the SKM 6000 handheld transmitter.
- SK 6000 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
- SK 6212 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6212 bodypack transmitter.
  - Product overview
  - Inserting and removing the BA 62 rechargeable battery
  - Mounting the antenna
  - Connecting a microphone to the SK 6212 bodypack transmitter
  - Connecting an instrument or line source to the SK 6212 bodypack transmitter
    You can connect instruments or audio sources with a line level to the SK 6212 bodypack transmitter.
  - Switching the SK 6212 on and off
  - Home screen
  - Displays on the SK 6212 bodypack transmitter display panel
    You can view the following information on the transmitter display.
  - Operating the menu of the SK 6212 bodypack transmitter
    Navigating through the menu and making changes.
  - Updating the transmitter firmware
- Modular L 6000 charger
  These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
- L 70 USB charger
- Establishing a radio link
  Note the following points when you establish a radio link between the transmitter and receiver.
- Synchronizing devices
- Cleaning and maintenance
  Note the following information when cleaning and maintaining Digital 6000 series products.

Inserting and removing the BA 62 rechargeable battery

NOTICE

Damage to the bodypack transmitter and/or rechargeable battery/battery compartment

If you touch the following contacts, they may become dirty or bent.

- Supply voltage contacts and bodypack transmitter contacts

- BA 62 rechargeable battery charging and data contacts

Do not touch the contacts on the BA 62 rechargeable battery or the SK 6212 bodypack transmitter.

Charge the BA 62 rechargeable battery before using it for the first time. For information about charging, see Charging the rechargeable batteries in the L 6000 charger.
It is possible that new rechargeable batteries cannot be fully charged to 100 % in the first few charging cycles.
The remaining operating time may still be unclear after the first few charging cycles. This will improve over time after more charging cycles because the rechargeable battery calibrates itself.

To insert the BA 62 rechargeable battery into the SK 6212 bodypack transmitter:

Open the battery compartment on the SK 6212 bodypack transmitter as shown in the figure.
Insert the BA 62 rechargeable battery into the SK 6212 bodypack transmitter as shown in the figure.
Close the battery compartment cover until it clicks into place.

To remove the BA 62 rechargeable battery from the SK 6212 bodypack transmitter:

Open the battery compartment on the SK 6212 bodypack transmitter as shown in the figure.
Remove the BA 62 rechargeable battery from the SK 6212 bodypack transmitter.