Starting up and operating devices of the Digital 6000 line.
These sections contain information about installing, starting up and operating the SKM 6000 handheld transmitter.
Navigating through the menu and making changes.
In this menu item, you can reset the transmitter settings to the factory settings.
These sections contain information about installing, starting up and operating the EM 6000 2-channel receiver.
You can view the following information on the transmitter display.
In this menu item, you can adjust a frequency in 25 kHz steps.
This menu item displays the frequency preset U together with its corresponding frequency.
In this menu item, you can set a freely selectable name for the transmitter.
In this menu item, you can adjust the input gain in 3 dB steps.
In this menu item, you can adjust the value for the low cut filter.
In this menu item, you can choose whether the home screen on the transmitter display shows the set frequency, the frequency preset, or the name of the transmitter or radio link.
In this menu item, you can activate or deactivate the lock-off for the transmitter.
In this menu item, you can activate a 1 kHz test tone that the transmitter transmits instead of the input signal.
In this menu item, you can set the behavior of the blue LED in the ON/OFF/ESC button.
In this menu item, you can display the installed firmware version and the overall frequency range for the transmitter.
These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
These sections contain information about installing, starting up and operating the SK 6212 bodypack transmitter.
These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
Note the following points when you establish a radio link between the transmitter and receiver.
Note the following information when cleaning and maintaining Digital 6000 series products.
