Configuring the network

All devices are factory presetto automatic IP address assignment.

To enable communication between the WSM software and the connected devices, configure the network (LAN connections) as follows:

Automatically obtaining an IP address
  1. Go to the Network Settings in your operating system.
  2. In the Internet Protocol (TCP/IP) properties window select the “Obtain an IP address automatically” option button for PCs or the “Configuration DHCP” option button for Macs.
The assignment of an IP address may take some minutes. With this, the configuration of the network is terminated.
Only launch the WSM software after having configured the network. For information on how to connect the transmitters and receivers to the computer, please refer to the individual instruction manuals.

If you want to use several WSMs in a network, please follow the instructions in chapter Using several WSM software in a network.