Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
Spectera
Detailed description of the start-up and operation of your selected hardware.
SEK
Product overview

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
  - Base Station
  - SEK
    - Product overview
    - Inserting and removing the rechargeable battery
      The SEK operates only with the recharable battery BA 70 (seperate accessory).
    - Mounting the antenna
      Two antennas are available, one for each frequency range.
    - Using the protection cap
      The cap protects the microphone / instrument input, when not in use.
    - Connecting a microphone / instrument
      You can connect a microphone or instrument to the SEK.
    - Connecting earphones
    - Changing the belt clip
      You can change the belt clip on the SEK or flip it over depending on how you want to wear it.
    - Meaning of the LEDs
      The Status LED and LEDs can indicate the following information.
    - Switching the SEK on and off
    - Information on the display
      You can view the following information on the SEKs display.
    - Pairing the SEK to the Base Station
    - Updating the SEK
      You can update the firmware of the SEK via LinkDesk or Spectera WebUI.
  - DAD
  - CHG 70N-C charger
    The CHG 70N-C is a network enabled charger featuring two individual charging bays.
  - L 70 USB charger
  - Modular L 6000 charger
    These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
  - Cleaning and maintenance
    Note the following information when cleaning and maintaining products of the Spectera series.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.

Product overview

1 LEDs: see Meaning of the LEDs
2 Status LED: see Meaning of the LEDs
3 Phones 3.5 mm jack: see Connecting earphones
4 Microphone / Instrument input: see Connecting a microphone / instrument
5 Rotary encoder: with push function; see Information on the display
6 Antenna: see Mounting the antenna
7 Display: see Information on the display
8 ON/OFF Button: see Switching the SEK on and off