Single-room setup with both SL Rack Receiver DW and SL Multi-Channel Receiver DW

  1. Install the SL Multi-Channel Receiver DW on a wall or the ceiling with the front side of the receiver facing into the room (see Mounting the receiver).
  2. Install the SL Multi-Channel Receiver DW to a wall or the ceiling with the front side of the receiver facing into the room (see Installing receivers in a rack and Connecting the receiver).
  3. Mount all antennas for the rack receivers as recommended and feasible (see Recommendations on antenna mounting).
  4. Connect a LAN cable supplying PoE to the Dante I / PoE / Ctrl RJ-45 socket of the first SL Multi-Channel Receiver DW (see Connecting the receiver).
    This receiver will become the Master.
  5. Wait until the LEDs of the receiver light up red.
  6. Connect a LAN cable supplying PoE to the Dante I / PoE / Ctrl RJ-45 sockets of all other SL Multi-Channel Receiver DW units (see Connecting the receiver).
  7. Schalten Sie alle Rack-Empfänger ein.
    They will synchronize with the Master.
When you are using multiple SL Multi-Channel Receiver DW units, it is possible to daisy-chain the network and audio signals by using the “Single-Cable Mode” (factory default setting, see Connecting the receiver).

PoE will not be daisy-chained, so a PoE injector is required for any additional SL Multi-Channel Receiver DW.