Home
Instruction manual
Information on installation and startup as well as operation of the microphone.
Installation and startup
The following sections provide information on installing and connecting the PROFILE USB-C microphone.
Connecting the microphone

Instruction manual
Information on installation and startup as well as operation of the microphone.
- Installation and startup
  The following sections provide information on installing and connecting the PROFILE USB-C microphone.
  - Mounting the microphone
    Depending on your set (PROFILE or PROFILE STREAMING SET), you can mount the USB microphone either on the supplied table stand or on the supplied boom arm.
  - Connecting the microphone
    - Connecting the USB-C cable to the microphone
    - Connecting headphones to the microphone
  - Positioning the microphone
    Properly aligning the microphone and maintaining the correct distance from the microphone are essential to ensuring the correct input signal is received and processed at the correct level.
- Operating instructions
  The following sections provide information on using the USB microphone.

Connecting the microphone

There are two connectors on the back of the PROFILE:

1 3.5 mm headphone socket: Headphone output for monitoring; See Adjusting the mixer control; See Setting the headphone volume
2 USB-C port: For power supply and data transmission

Before starting up the microphone, make sure that the device you wish to use meets the system requirements (see Product information).