Home
Instruction manual
Information on installation and startup as well as operation of the microphone.
Operating instructions
The following sections provide information on using the USB microphone.
Setting the headphone volume
The headphone output on the back of the microphone (3.5 mm jack) allows you to monitor the mixed audio signal from the microphone and the playback via the USB-C port (audio signal from PC/mobile device).

Instruction manual
Information on installation and startup as well as operation of the microphone.
- Installation and startup
  The following sections provide information on installing and connecting the PROFILE USB-C microphone.
- Operating instructions
  The following sections provide information on using the USB microphone.
  - Control elements
  - Muting the microphone
    The microphone can be muted during operation. When the microphone is muted, no audio input signals are processed.
  - Microphone amplification (gain)
    You can use the GAIN controller to increase or decrease the input level in order to achieve a “clean input signal.” Depending on the strength of the incoming audio signal, the LED will be green or yellow.
  - Adjusting the input level (gain)
  - Adjusting the mixer control
    The mixer control allows you to set a custom mix of two audio sources.
  - Setting the headphone volume
    The headphone output on the back of the microphone (3.5 mm jack) allows you to monitor the mixed audio signal from the microphone and the playback via the USB-C port (audio signal from PC/mobile device).

Setting the headphone volume

The headphone output on the back of the microphone (3.5 mm jack) allows you to monitor the mixed audio signal from the microphone and the playback via the USB-C port (audio signal from PC/mobile device).

The mixer control allows you to set a custom mix of two audio sources: the direct microphone input signal (e.g., your voice) and the audio output signal from your device (e.g. playback from a PC or mobile device) that arrives via the microphone’s USB-C port. You can find more information in chapter Adjusting the mixer control.

WARNING

Danger due to high volume levels

Volume levels that are too high may damage your hearing.

Reduce the volume and the microphone amplification, if applicable, before using the product.

To adjust the headphone volume:

Rotate the volume control to the left to turn down the volume.
Connect the headphones to the headphone socket.
Put the headphones on and gradually adjust the volume of the headphone output.