Mounting the antenna on a stand
- Before mounting the antenna, see the information in chapter Installing and mounting the antenna.
To mount the antenna on a stand:
The thread in the middle of the mounting frame is suitable for mounting on a standard microphone stand with boom arm and 3/8" thread.
| CAUTION | |
|---|---|
Danger due to falling objects
If you mount the antenna improperly on the stand, the stand and receiver may tip over. This can cause personal injury and damage to property.
Use a stand that is designed for a central load of 5 kg.
Adjust the length of the boom arm as short as possible, as shown in the figure.
Set the height of the stand to a maximum of 2 meters.
Make sure that the total weight of the stand and the mounted receiver does not exceed 7 kg.
| |
- Screw the mounting frame onto the microphone stand as shown.
-
Insert the antenna into the mounting frame as shown until you hear it click into place.
