Operation

To switch the microphone on or off:
  1. Slide the switch ON/OFF to the right.

    The microphone goes on and the LED lights up green.
    If the LED lights up red, the remaining battery runtime is less than 4 hours.
  2. Slide the switch ON/OFF to the left.
    The microphone is off and the LED goes out.
To set the sensitivity:
  1. Set the input level of the camera to manual.
  2. Slide the switch to the desired position.

To set the low-cut filter:
  1. Switch the low-cut filter on or off.

To use the windshield:
  1. Pull the windshield over the microphone.