Outputting audio signals

The EM-XSW 2 has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket.

  1. Always use only one of the two output sockets.

To connect an XLR cable:
  1. Plug the XLR cable into the Balanced socket on the EM-XSW 2.
To connect a jack cable:
  1. Plug the jack cable into the Unbalanced socket on the EM-XSW 2.
  2. Set the Line/Mic switch to the desired position.
    • Line: when using instruments or other line sources with the SK-XSW bodypack transmitter
    • Mic: when using the SKM 835/865-XSW handheld transmitter or a microphone with the SK-XSW bodypack transmitter