Home
Instruction manual
Information on planning, installation, commissioning, operation, and control.
Planning and installation
Information about connecting to a network, audio output and installation planning.
Connecting to a network

Instruction manual
Information on planning, installation, commissioning, operation, and control.
- Planning and installation
  Information about connecting to a network, audio output and installation planning.
  - Connecting to a network
  - Outputting analog audio signals
    Use the Analog Out connection socket to output analog audio signals. The analog audio cable is not included in the scope of delivery. Depending on the audio input of your DSP, the cable must connect 3-pin terminal to 3-pin XLR terminal or to jack.
  - Outputting digital audio signals
    Two RJ-45 sockets are available for outputting digital audio signals. The interface supports redundant output and daisy-chaining (switched mode) of multiple ceiling microphones.
  - Planning the installation
- Installation and startup
  Instructional chapters on mounting and configuring the device.
- Monitoring & control
  The TCC M Plus offers comprehensive monitoring and control functions that allow users to efficiently manage audio settings via various applications and interfaces.
- Cleaning and maintenance
- Transport
  This chapter contains information on the proper transport of the TeamConnect Ceiling Medium Plus.

Connecting to a network

Power supply and configuration

The TeamConnect Ceiling M Plus is supplied with power via Power over Ethernet through the RJ-45 Ethernet PoE/Ctrl socket and can be configured using the local web UI (LUI). In your network, either use a switch that provides PoE or alternatively use a PoE injector.

Note:

Use only shielded STP network cables that do not exceed an AWG value of 24.