Home
Installation and startup
Instructional chapters on mounting and configuring the device.
Mounting the TeamConnect Ceiling 2 on a VESA mount
The TeamConnect Ceiling Medium can be mounted on standard VESA MIS D mounts.

Installation and startup
Instructional chapters on mounting and configuring the device.
- Variant 1: installed flush in a dropped/coffered ceiling
  The TeamConnect Ceiling 2 can be easily installed in a dropped ceiling or coffered ceiling with square ceiling tiles (600 x 600 mm). Angle brackets are available for ceiling tiles with the standard dimensions of 2 ft or 625 mm.
- Variant 2: directly below the ceiling
  To mount the product directly below the ceiling, you need the SL CM FB ceiling mounting frame.
- Variant 3: suspended from the ceiling
  For suspended mounting, you need the SL CM SK ceiling suspension set.
- Mounting the TeamConnect Ceiling 2 on a VESA mount
  The TeamConnect Ceiling Medium can be mounted on standard VESA MIS D mounts.
- Configuring the TeamConnect Ceiling 2 with the Sennheiser Control Cockpit
- Configuring the TeamConnect Ceiling 2 with a media control system
  After initial configuration with the Sennheiser Control Cockpit, the TeamConnect Ceiling 2 can also be operated using a media control system.

Mounting the TeamConnect Ceiling 2 on a VESA mount

The TeamConnect Ceiling Medium can be mounted on standard VESA MIS D mounts.

The SL CM VB VESA adapter (available separately) allows you to mount the TeamConnect Ceiling 2 on any 100 x 100 mm or 200 x 200 mm VESA mount.

VESA-Adapter an VESA-Halterung montieren

Fasten the ceiling mount to the ceiling using suitable screws and anchors.
Observe the mounting specifications from the manufacturer.

Proceed as follows to fasten the SL CM VB VESA adapter plate to the VESA mount:

First fasten the SL CM VB VESA adapter plate to the VESA mount.
Then mount the TeamConnect Ceiling 2 to the SL CM VB VESA adapter plate as shown in figure 2.

The TeamConnect Ceiling 2 has been mounted on a VESA mount.