Configuring the TeamConnect Ceiling 2 with the Sennheiser Control Cockpit

Downloading Sennheiser Control Cockpit
To configure and use the TeamConnect Ceiling 2, you need the free Sennheiser Control Cockpit control software. You can download it here: sennheiser.com/control-cockpit-software
To use the Sennheiser Control Cockpit, you must complete a one-time registration with your e-mail address to receive the software activation code.
  1. The Sennheiser Control Cockpit must be used to configure the product for the first time. After that, the TeamConnect Ceiling 2 can also be operated using a media control system. To have access to the full range of functions, however, you should use the Sennheiser Control Cockpit.
There are two ways to operate the TeamConnect Ceiling 2 using the Sennheiser Control Cockpit:
  1. Variant 1: integrated in an existing network
  2. Variant 2: as a standalone solution with a PC and a PoE-capable network switch
Variant 1: integrating the TeamConnect Ceiling 2 in an existing network
  1. The Sennheiser Control Cockpit should be installed on a host PC (Windows 7 or later) that is in the same network as the TeamConnect Ceiling 2 that you want to configure. The Sennheiser Control Cockpit runs on the host PC as a Windows service. Any browser-capable device in the network (e.g. PC/Mac, tablet or smartphone) can operate the product using the Control Cockpit Client, which is accessed at a specific URL in the browser.
    TeamConnect Ceiling 2 Netwerkintegration
    The online help contains detailed information about the functions of the Sennheiser Control Cockpit and how to configure the TeamConnect Ceiling 2 and the network. The online help can be found on the Sennheiser Control Cockpit product page (sennheiser.com/control-cockpit-software) and in the software itself.
    Team Connect Ceiling 2 has been integrated.
Variant 2: configuring the TeamConnect Ceiling 2 as a standalone solution using a computer
  1. Proceed as follows to configure the TeamConnect Ceiling 2 without network integration using a computer: Connect the computer to a PoE-capable network switch using a network cable (Cat5e or higher). Alternatively, you can use a PoE injector.
  2. Connect the network switch to the Ethernet PoE/Ctrl socket on the TeamConnect Ceiling 2.
    TeamConnect Ceiling 2 Ethernet PoE/Ct Anschluss

    Team Connect Ceiling 2 has been integrated.
TeamConnect Ceiling 2 can now be operated.