Home
User Manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
Monitoring & Controlling
The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
DeviceHub
DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
Network
The following network settings are available for the TC Bar.
Starting Bluetooth® pairing
The pairing process can be started using the Bluetooth® button.

User Manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
- Quick start
  The TC Bar can be connected in just a few steps and used immediately.
- Product Overview
- Mounting
- Commissioning the Device
  This chapter describes the initial configuration and commissioning of the TC Bar.
- User Manual
  The following chapters contain additional information on operating the TC Bar.
- Monitoring & Controlling
  The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
  - Local Web UI (LUI)
    LUI provides a user-friendly platform for interacting with system functionalities and features.
  - DeviceHub
    DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
    - Getting Started
      Initial setup steps including registration, organization, user management, and device enrollment preparation.
    - Device enrollment
      Follow the steps to enroll your device to DeviceHub, ensuring proper network connectivity and time configuration.
    - Audio
      The following settings can be managed via the audio tab.
    - Camera
      An overview of camera settings and controls.
    - Device
      An overview of the device's key features and specifications.
    - Network
      The following network settings are available for the TC Bar.
      - Activating tagged VLAN (Dante® network)
        A VLAN (virtual local area network) separates a physical network into partial networks. As a result, you can set up several virtual networks from a physically existent switch port (such as the Dante® network and control network).
      - Activating Bluetooth®
        When the device is delivered, Bluetooth® is deactivated and can be activated in LUI or DeviceHub.
      - Starting Bluetooth® pairing
        The pairing process can be started using the Bluetooth® button.
      - Activating Dante® signal forwarding
        Using the Dante controller software, you can activate a digital audio network protocol via Ethernet for the routing and a synchronization of Dante®-compatible devices.
      - Activating the continuous Dante® stream
        This function enables the continuous transmission of microphone streams over Dante®.
      - Selecting a network mode
        You can configure the various network modes using the panel in Sennheiser’s control software.
    - Access & Security
      Overview of access and security features.
    - Maintenance
      In this section, you will find the maintenance procedures, along with instructions for configuring NTP servers and managing time synchronization settings on the device.
  - Control Cockpit
    Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
- Product care
  Fundamental care and maintenance practices to help ensure the longevity and proper functioning of the device.

Starting Bluetooth® pairing

The pairing process can be started using the Bluetooth® button.

Please note that Bluetooth® is deactivated in the factory settings. To create a Bluetooth® connection with a device that is capable of Bluetooth®, you must activate the Bluetooth® function in LUI or DeviceHub and then start the pairing process (Activating Bluetooth®).

There are several ways to start the Bluetooth® pairing process:

Using the LUI or DeviceHub
Using the initialization button on the TC Bar
Using the remote control

To start Bluetooth® pairing in LUI or DeviceHub:

Navigate to Network.
Under Bluetooth®, click the switch Start.
The blue LED flashes. Bluetooth pairing is activated. The device is in pairing mode and can be connected to a device that is capable of Bluetooth.

To start Bluetooth® pairing via the TC Bar:

Press the Bluetooth® pairing button on the left side of the TC Bar for at least three seconds.
The blue LED flashes. Bluetooth pairing is activated. The device is in pairing mode and can be connected to a device that is capable of Bluetooth.

To start Bluetooth® pairing via the remote control:

Press the Bluetooth® pairing button on the remote control for at least three seconds.

The blue LED flashes. Bluetooth pairing is activated. The device is in pairing mode and can be connected to a device that is capable of Bluetooth.

Bluetooth® pairing has begun. You can now couple the TC Bar with a device that is capable of Bluetooth® (see Coupling the TC Bar a device capable of Bluetooth®).