Home
User manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
Putting the unit into operation
This chapter describes the initial configuration and commissioning of the TC Bar.
Connecting the TC Bar to an external screen (optional)
You can use the TC Bar to transmit provisioned video signals to external screens using an HDMI® connection.

User manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
- Product overview
- Mounting
- Putting the unit into operation
  This chapter describes the initial configuration and commissioning of the TC Bar.
  - Preparing the remote control
    You can use the remote control to control the different camera modes, activate the Bluetooth® initialization process, and configure various audio settings, such as the volume and muting (see tc-bar/overview-remote-control.html).
  - Connecting the TC Bar to the power supply system and starting it
    When the TC Bar is connected to the power supply system, the device starts automatically.
  - Connecting the TC Bar to a device (stand-alone solution)
    The TC Bar can be connected to the device to be used (PC/laptop/Mac) and started using a USB-C® connection.
  - Connecting the TC Bar to an external screen (optional)
    You can use the TC Bar to transmit provisioned video signals to external screens using an HDMI® connection.
- Initial configuration in the Control Cockpit
  This section guides you step by step through the initial configuration using tried-and-trusted methods and procedures.
- Operating instructions
  The following chapters contain additional information on operating the TC Bar.
- Cleaning and maintenance
  Note the following information when cleaning and maintaining the product.
- Replacing remote control batteries
  You can replace the AAA 1.5 V batteries on your own .
- Storing accessories
  You can store both the remote control and the lens cap in the bracket.
- Transport
  Here you will find information about properly preparing the TC Bar for transport.

Connecting the TC Bar to an external screen (optional)

You can use the TC Bar to transmit provisioned video signals to external screens using an HDMI® connection.

The TC Bar M has two HDMI® outputs that can be configured freely and individually occupied. Please note that the HDMI® output is deactivated in the factory settings. You can activate the HDMI® output in the Sennheiser Control Cockpit (Activating the HDMI® output).

To connect the TC Bar to an external screen:

Insert the HDMI® cable included in the delivery into the HDMI output connection of the TC Bar.
Insert the other end of the HDMI® cable into the HDMI IN input connection of the external screen.

To disconnect the TC Bar from an external screen:

Pull the HDMI® cable of the HDMI connection out of the TC Bar.

The TC Bar has been connected to an external screen.