Home
Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
Monitoring & Controlling
The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
Control Cockpit
Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
Audio Settings
The following settings can be adjusted in the audio tab.
Handling auto mix priority
You can use the auto mix priority to set the priority of the channels, including the internal microphone arrays, via individual controllers.
Configuring fade time
You can use the fade time to configure the speed at which the devices switches between the audio sources connected to the auto mixer.

Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
- Quick start
  The TC Bar can be connected in just a few steps and used immediately.
- Product Overview
- Mounting
- Start-up the product
  This chapter describes the initial configuration and commissioning of the TC Bar.
- Usage
  The following chapters contain additional information on operating the TC Bar.
- Monitoring & Controlling
  The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
  - Local Web UI (LUI)
    LUI provides a user-friendly platform for interacting with system functionalities and features.
  - DeviceHub
    DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
  - Control Cockpit
    Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
    - Initial configuration
      This section guides you step by step through the initial configuration using tried-and-trusted methods and procedures.
    - Audio Settings
      The following settings can be adjusted in the audio tab.
      - Selecting a sound profile
        Sound profiles are presets that are optimized for the intended mounting options.
      - Setting the internal microphone noise gate
        The noise gate ensures background noises are not intensified during pauses in speech.
      - Handling auto mix priority
        You can use the auto mix priority to set the priority of the channels, including the internal microphone arrays, via individual controllers.
        Configuring fade time
        You can use the fade time to configure the speed at which the devices switches between the audio sources connected to the auto mixer.
      - Adapting far end output for TCC M
        You can adapt the amplification of the TCC M signal with far end output.
      - Setting the volume
        You can adjust the volume by using the control panel in Sennheiser´s control software.
      - Muting internal TC Bar microphone
        Use the remote control or your control software to mute or unmute the internal microphone.
      - Muting all microphones
        Mute all input channels with a single click.
      - Enabling Dante® speaker output
        Route audio to external Dante® speakers and disable the device's internal speakers.
      - Activating location-based mute
        You can mute several devices in a room at the same time by using the mute switch on any transmitter.
      - Resetting the audio settings
        You can reset all audio settings to the factory settings.
    - Zones
      The TeamConnect Bar allows you to define two different types of zones.
    - Device Settings
      The following device settings are available for the TC Bar.
    - Network Settings
      The following network settings are available for the TC Bar.
    - Camera Settings
    - Access
      Here you can manage third-party access and device access.
- Product care
  Fundamental care and maintenance practices to help ensure the longevity and proper functioning of the device.

Configuring fade time

You can use the fade time to configure the speed at which the devices switches between the audio sources connected to the auto mixer.

Start by reducing the int. mic. by -30 dB.
Speak in various positions and listen to whether the sound meets your expectations on the other end of a telephone conference.
Select different values for the fade time and listen to the transition from one microphone to another.

The fade time has been configured.