Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
Spectera
Detailed description of the start-up and operation of your selected hardware.
DAD
Updating the DAD
The firmware of the antenna will update automatically, when connected to the Base Station.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Network & Security Guide
  This document is intended for IT administrators, system integrators and event technicians and serves as an planning and configuration guide for integrating components of the Spectera offering into diverse network environments from small home networks up to enterprise networks.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
  - Network & Security Guide
    This document is intended for IT administrators, system integrators and event technicians and serves as an planning and configuration guide for integrating components of the Spectera offering into diverse network environments from small home networks up to enterprise networks.
  - Base Station
  - SEK
  - DAD
    - Product overview
    - Information on antenna setup
    - Meaning of the LED
      The LED on top and below indicates the same information.
    - Placing on a stand
      The thread is suitable for mounting on a standard microphone stand with 3/8" or 5/8" thread.
    - Connecting/disconnecting the antenna
      The cable supplies power and exchanges data.
    - Antenna cable extension
      Longer cable distances are possible with the use of fiber optic cables and media converters.
    - Updating the DAD
      The firmware of the antenna will update automatically, when connected to the Base Station.
  - CHG 70N-C charger
    The CHG 70N-C is a network enabled charger featuring two individual charging bays.
  - L 70 USB charger
  - Modular L 6000 charger
    These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
  - Cleaning and maintenance
    Note the following information when cleaning and maintaining products of the Spectera series.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.

Updating the DAD

The firmware of the antenna will update automatically, when connected to the Base Station.

NOTICE

Data loss during firmware update

The audio transmission is interrupted during the firmware update of the Base Station, the antenna or the mobile device.

After the firmware update, the device is restarted automatically.

Do not update the firmware during an active live audio transmission.

To update the firmware:

Connect the antenna to a Base Station. See Connecting/disconnecting the antenna.

To update the Base Station, see Updating the Base Station.

The LED is flashing green and red during the update.

The firmware has been updated.