Home
Instruction manual
Information on handling, operation, user interface and application scenarios.
Start-up the product
This chapter describes the initial configuration and commissioning of the product.
Inserting/removing the receiver and transmitter

Instruction manual
Information on handling, operation, user interface and application scenarios.
- Start-up the product
  This chapter describes the initial configuration and commissioning of the product.
  - Switching devices on and off
  - Charging devices / checking charge levels
    Receivers and transmitters charge automatically when they are inserted into the charging bar (see Inserting/removing the receiver and transmitter). Alternatively, they can also be charged separately via USB-C.
  - Inserting/removing the receiver and transmitter
  - Connecting a receiver to a smartphone
    The receiver can be connected to a smartphone using the included USB-C or lightning adaptor.
  - Connecting a receiver to a camera
    The receiver can be connected to a camera using the supplied hot shoe adaptor.
  - Connecting a receiver or transmitter to a PC or Mac
    Receivers and transmitters can be connected to a PC or Mac using the included USB-C cable. This allows you to access recordings or perform firmware updates (see Resetting or installing updates).
- Usage
  The following chapters contain additional information on operating the product.
- Cleaning and maintenance
  Note the following information when cleaning and maintaining the product.
- Transport
  This chapter contains information on the proper transport of the Profile Wireless.

Inserting/removing the receiver and transmitter

To remove the receiver:

Press the release button on the bottom of the charging bar.
The receiver is ejected and can be removed.

To insert the receiver:

Insert the receiver into the appropriate slot in the charging bar.
The receiver locks in with an audible click.

To remove the transmitters:

Press the two release buttons on the left and right side of the charging bar.
The transmitters are ejected and can be removed.

To insert the transmitters:

Insert the transmitters into the appropriate slots in the charging bar.
The transmitters lock in with an audible click.