Product overview

Here you will find an overview of the operating elements on the front of the device and the connections on the rear.

Front

1 Displaying and using channel 1 (CH 1): See Displays on the EM 6000 display panel; See Buttons for navigating the menu
2 Displaying and using channel 2 (CH 2): See Displays on the EM 6000 display panel; See Buttons for navigating the menu
3 ON/OFF button: See Switching the EM 6000 on and off
4 ESC button for canceling an action in the menu (separate for CH 1 and CH 2): See Buttons for navigating the menu
5 SAVE button for saving settings in the menu (separate for CH 1 and CH 2): See Buttons for navigating the menu
6 Headphone button for listening in the particular channel via the HEADPHONES socket (13) (separate for CH 1 and CH 2): See Using the headphone output
7 SYNC button for synchronizing the channel settings to a transmitter (separate for CH 1 and CH 2): See Synchronizing devices
8 Jog dial for navigating through the menu (separate for CH 1 and CH 2): See Buttons for navigating the menu
9 Warning indicator for error messages (separate for CH 1 and CH 2): See Status messages
10 Display (separate for CH 1 and CH 2): See Displays on the EM 6000 display panel
11 Infra-red interface for the SYNC function: See Synchronizing devices
12 Volume control for the HEADPHONES headphone socket (13): See Using the headphone output
13 HEADPHONES headphone socket: See Using the headphone output

1 Power socket: See Connecting/disconnecting the EM 6000 to/from the power supply system
2 Ethernet socket for controlling the device via the network (WSM and Control Cockpit): See Connecting the EM 6000 to a network
3 Digital Audio AES3 digital audio output: See Outputting digital AES3 audio signals
4 Word clock BNC sockets: See Connecting the word clock; See System -> Wordclock menu item; See Word clock scenarios for digital audio (AES3 and Dante®)
5 Bal AF out analog audio outputs for the CH 1 and CH 2 channels: One XLR and 6.3 mm (1/4") jack per channel, transformer-balanced, parallel; See Outputting analog audio signals
6 BNC antenna inputs and BNC antenna outputs for cascading: See Connecting antennas; See Recommendations for using antennas

1 Power socket: See Connecting/disconnecting the EM 6000 to/from the power supply system
2 Dante® interface with two RJ-45 sockets, Primary and Secondary: See Outputting audio via a Dante® network (EM 6000 DANTE only)
3 Ethernet socket for controlling the device via the network (WSM and Control Cockpit): See Connecting the EM 6000 to a network
4 Digital Audio AES3 digital audio output: See Outputting digital AES3 audio signals
5 Word clock BNC sockets: See Connecting the word clock; See System -> Wordclock menu item; See Word clock scenarios for digital audio (AES3 and Dante®)
6 Bal AF out analog audio outputs for the CH 1 and CH 2 channels: One XLR and 6.3 mm (1/4") jack per channel, transformer-balanced, parallel; See Outputting analog audio signals
7 BNC antenna inputs and BNC antenna outputs for cascading: See Connecting antennas; See Recommendations for using antennas