Connecting the word clock

You can use the internal word clock on the EM 6000 or connect an external word clock.

You can also output the external word clock and cascade it up to 16 receivers.

The word clock output transmits only the external word clock that is connected via the word clock input. The internal word clock is not output via the word clock output.

For more information about the word clock, see Word clock scenarios for digital audio (AES3 and Dante®).
To connect an external word clock:
  1. Use a coaxial BNC cable (75 Ω) to connect the external word clock to the Wordclock In input. A suitable cable is available as an accessory part, see Antennas and accessories.
To cascade the word clock:
  1. Connect the Wordclock In input of the next EM 6000 to the Wordclock Out output of the previous EM 6000.