SR 2000 IEM | SR 2050
RF characteristics
| Frequency ranges | Aw+: 470-558 MHz
Gw: 558 – 626 MHz Gw1: 558 – 608 MHz GBw: 606 – 678 MHz Bw: 626 – 698 MHz |
| Transmission frequencies | up to 3,000 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 32 factory-preset channels 6 frequency banks, each with up to 32 user programmable channels |
| Switching bandwidth | up to 75 MHz |
| Frequency stability | ±10 ppm (–10 °C to +55 °C) |
| Antenna output | BNC socket, 50 Ω |
| RF output power at 50 Ω | typ. 10/30/50 mW (Low/Standard/High)
switchable typ. 100 mW (SR 2050XP IEM) |
AF characteristics
| Modulation | wideband FM stereo (MPX pilot tone) |
| Compander system | Sennheiser HDX |
| Nominal/peak deviation | ±24 kHz / ±48 kHz |
| MPX pilot tone (frequency/ deviation) | 19 kHz / ±5 kHz |
| AF frequency response | 25 – 15,000 ¡Hz |
| AF input BAL AF IN L (I)/BAL AF IN R (II) | 2 x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced |
| Max. input level | +22 dBu |
| THD (at 1 kHz and nominal deviation) | ≤ 0,9 % |
| Signal-to-noise ratio at nominal load and peak deviation | > 90 dB |
| AF output LOOP OUT BAL L (I)/LOOP OUT BAL R (II) | ¼" (6.3 mm) stereo jack socket, balanced |
Overall device
| Temperature range | -10 °C to +55 °C |
| Power supply | 100 – 240 V AC |
| Current consumption | 0.2 A |
| Dimensions | approx. 217 x 483 x 43 mm (8.54" x 19.02" x 1.69") |
| Weight | approx. 2,700 g (5.95 lbs) |