Radio and frequencies
Why won’t my transmitter synchronize with my receiver?
- To synchronize the devices, ensure that no menu is selected on the transmitter (no values flashing).
- The receiver’s battery compartment must be open.
- The distance between the transmitter and receiver should be approx. 10 cm.
What is the transmission range of the transmitter/receiver?
- Up to 50 m in an ideal environment (without obstacles)
What is the best way to wear the bodypack receiver?
- Do not kink, bend or cover the antenna.
- Avoid skin contact with the antenna.
- If possible, attach it to your clothing with the belt clip.
The transmitter and receiver are synchronized, but there is no connection.
- Correctly mount the antennas on the transmitter (Connecting rod antennas).
- Resynchronize the transmitter and receiver (Synchronizing devices).
The receiver does not show a level during the soundcheck
- Switch on the transmitter (see Switching the transmitter on and off).
- Make sure that the same frequency is set on the transmitter and receiver (Establishing a radio link | Synchronizing devices).
- Check that the antennas and the antenna cables are correctly connected to the transmitter.
- Move the transmitter to a better location.
- If necessary, use an antenna booster.
The display on the receiver shows radio levels even though the paired transmitter is not switched on
- The selected frequency has interference. This means that this frequency or a nearby frequency is already in use in your area.
- Select another frequency.
- Perform a frequency test (Performing a soundcheck).
- Synchronize the devices again (Synchronizing devices).
Which frequency ranges are available?
- See the chapter Frequency bank system.