Usability

Why won’t my transmitter synchronize with my receiver?

• To synchronize the devices, ensure that no menu is selected on the transmitter (no values flashing).
• The receiver’s battery compartment must be open.
• The distance between the transmitter and receiver should be approx. 10 cm.
• For more information, see chapter Performing a soundcheck.

Can I see the receiver’s battery status on the transmitter?

• No, the receiver’s battery status is only displayed on the receiver (see Battery status).

How do I know if my receiver is switched on?

• The LED on the receiver lights up (LED indicators).
• The display panel shows the current settings (Switching the receiver on and off).
• You can reactivate the display panel by pressing any button on the receiver.

The LED on the receiver is steady yellow or flashing yellow. What does that mean?

• The receiver is receiving audio signals. The display indicates different audio signal levels (see LED indicators).

The LED on the receiver is steady red. What does that mean?

• The receiver has no wireless reception (see LED indicators).

The LED on the receiver is flashing red. What does that mean?

• The receiver’s battery status is critical (see LED indicators).
• The batteries or rechargeable batteries must be replaced (Inserting and removing the batteries/rechargeable batteries).

Can I also operate an XSW IEM with desktop applications such as WSM or Control Cockpit?

• No, that is not possible.

Is there an app for the XSW IEM series?

• No, there is no app for this series.

Can I switch on my transmitter without it transmitting immediately?

• No. To find an interference-free frequency, we recommend leaving the transmitter switched off and carrying out a frequency test with the receiver (see Performing a soundcheck).

Can I operate the XS Wireless 1 and 2 series together with the XSW IEM series?

• Yes, the stereo transmitter is designed for interference-free operation with the wireless microphones of the XS Wireless series.

What exactly does the “GAIN” setting do?

• “GAIN” adjusts the level of the audio signal coming from the transmitter Setting the input sensitivity (GAIN).
• Set the input sensitivity on the transmitter so that the level shown on the display does not reach the maximum deflection (PEAK) (Setting the input sensitivity (GAIN)).

What is the best way to wear the bodypack transmitter?

• Do not kink, bend or cover the antenna.
• Avoid skin contact with the antenna.
• If possible, attach it to your clothing with the belt clip.