Home
Knowledge base
Central hub for information, resources, and guides with further content on the product and/or service.
Network guide
This document is intended for system integrators and room planners and serves as a planning guide for the network integration of the TeamConnect Bar (TC Bar) in a room.
Network availability and extensions
Danger of Network Loop
A network loop occurs when a network has more than one active path carrying information from the same source to the same destination.

Knowledge base
Central hub for information, resources, and guides with further content on the product and/or service.
- Cloud connectivity guide
  This document provides AV /IT professionals with step-by-step guidance on enabling cloud connectivity for the TeamConnect Bar (TC Bar) and preparing it for integration with Sennheiser DeviceHub, Sennheiser's cloud-based device management platform.
- Audio/video application guide
  This guide provides technical guidance for planning, configuring, and operating TeamConnect Bar systems in audio/video conferencing environments.
- Network guide
  This document is intended for system integrators and room planners and serves as a planning guide for the network integration of the TeamConnect Bar (TC Bar) in a room.
  - Requirements
  - Control software
    The TC Bar can be operated and managed through multiple Sennheiser control applications.
  - Network modes
    To integrate the TC Bar into an existing network structure and control it, use one of the provided control software from Sennheiser such as Sennheiser Device Hub, the Local Web UI, or Sennheiser Control Cockpit.
  - Network availability and extensions
    - Dante® features for TC Bar S and M
      With the built-in Dante Embedded Platform (DEP), the TC Bar integrates media and control of your entire AV system over a single IP network.
    - Virtual Local Area Network (VLAN 802.1Q)
    - Danger of Network Loop
      A network loop occurs when a network has more than one active path carrying information from the same source to the same destination.
  - Best practice
  - Ports and protocols
  - Trouble shooting
- Security white paper
  This white paper aims to provide IT professionals with an in-depth understanding of the TC Bar, its components, and its security features.
- FAQ
  The most frequent questions and answers summarized in a chapter.

Danger of Network Loop

A network loop occurs when a network has more than one active path carrying information from the same source to the same destination.

The information loops and amplifies itself using the additional path instead of stopping when it reaches its destination. Network loops might cause a slow, irregular Internet connection or network failure.

Examples:

Both cables coming from the two ports of the TC Bar M are plugged into the same network switch.
- Make sure you always connect the TC Bar M to two different networks that do not run via a common switch.
  - Ethernet I: Sennheiser control software
  - Ethernet II: Dante® network
Both ends of an Ethernet cable are plugged into the same router.
- Unplug the Ethernet cable.