Mounting gooseneck microphones: table| lectern | stand

You can mount gooseneck microphones:
  • On mobile table bases
  • Stands
  • Fixed installation sockets or shock mounts


Mounting ME 3x microphone head on MZH gooseneck
  1. Screw one of the microphone heads firmly onto the gooseneck to ensure a proper ground connection.
A) Mounting MEG/MZH gooseneck microphone on MAT table stand
  1. Plug the XLR connector of the gooseneck microphone into a corresponding connector on the table stand.
  2. Point the microphone toward the speaker.
B) Mounting MEG/MZH gooseneck microphone on MZFS stand
  1. Plug the XLR-3 connector of the gooseneck microphone into the corresponding connector on the stand.
C) Mounting MEG/MZH gooseneck microphone with MZT installation socket/MZS shock mount
Once you have chosen a position for the product (see Planning the position of the built-in products):
  1. Drill a hole with a diameter of
    • MZT 30 (-L) table installation socket: 24 mm OR
    • MZS 31 shock mount table mount: 51 mm
    in the installation surface (panel thickness 10 mm - 65 mm).

  2. Insert the installation socket or shock mount into the hole.
  3. Plug the XLR connector of the gooseneck microphone into a corresponding MZT 30 (-L) connector or into the MZS 31 shock mount.