Home
Instruction manual
Information on installation and startup as well as operation of the microphone.
Installation and startup
The following sections provide information on installing and connecting the PROFILE USB-C microphone.
Positioning the microphone
Properly aligning the microphone and maintaining the correct distance from the microphone are essential to ensuring the correct input signal is received and processed at the correct level.
Aligning the microphone on the boom arm

Instruction manual
Information on installation and startup as well as operation of the microphone.
- Installation and startup
  The following sections provide information on installing and connecting the PROFILE USB-C microphone.
  - Mounting the microphone
    Depending on your set (PROFILE or PROFILE STREAMING SET), you can mount the USB microphone either on the supplied table stand or on the supplied boom arm.
  - Connecting the microphone
  - Positioning the microphone
    Properly aligning the microphone and maintaining the correct distance from the microphone are essential to ensuring the correct input signal is received and processed at the correct level.
    - Aligning the microphone on the table stand
    - Aligning the microphone on the boom arm
- Operating instructions
  The following sections provide information on using the USB microphone.

Aligning the microphone on the boom arm

Note:

Make sure that the cable is loose and not too tight over the joint so that you do not put excessive strain on the USB-C cable when the boom arm is extended.

Aligning the microphone on the boom arm:

Adjust the joints of the boom arm so that a distance of 5 to 15 cm (2ʺ to 6ʺ) is maintained between the speaker and the microphone.

The microphone is now aligned and ready for use.