Regulatory information
Information on manufacturer declarations, environmental and disposal notices, and terms of use.
Model: SEBT1, IE 100 PRO
Frequency band: 2400 - 2483.5 MHz
Transmit power: 10 mW (max.)
Warranty
Sennheiser electronic SE & Co. KG gives a warranty of 24 months on these products.
For the current warranty conditions, please visit our website at sennheiser.com or contact your Sennheiser partner.
In the US please contact:
Sennheiser Electronic Corporation
1 Enterprise Drive, Old Lyme, CT 06371
Warranty for Australia and New Zealand only
Sennheiser Australia Pty Ltd provides a warranty of 24 months on these products. For the current warranty conditions, visit Sennheiser website: Australia: sennheiser.com, New Zealand: sennheiser.com
Sennheiser goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any remedy available to be consumer which is granted by law.
To make a claim under this contract, raise a case via Sennheiser website. Australia: sennheiser.com/support, New Zealand: sennheiser.com/support
All expenses of claiming the warranty will be borne by the person making the claim.
Sennheiser international warranty is provided by: Sennheiser Australia Pty Ltd (ABN 68 165 388 312) Level 14, Tower A Zenith Building, 821 Pacific Highway, Chatswood NSW 2067, Australia
Europe
In compliance with the following requirements
|
 |
 |
 |
Notes on disposal
The symbol of the crossed-out dumpster on the product, the (rechargeable) battery (if applicable) and/or the packaging indicates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their service life. For the packaging, follow the regulations in your country for separating waste. Improper disposal of packaging materials can be harmful to your health and the environment.
The separate collection of waste electrical and electronic equipment, (rechargeable) batteries (if applicable) and packaging is intended to promote reuse and recycling and to prevent negative impacts on public health and the environment, for example due to hazardous substances contained in these products. At the end of their service life, recycle electrical and electronic equipment and (rechargeable) batteries so that their materials can be reused and to prevent environmental pollution.
If (rechargeable) batteries can be removed without destroying them, you are obliged to dispose of them separately (see the product’s operating instructions for information on how to remove the batteries safely). Be especially careful when handling (rechargeable) batteries containing lithium, as these pose special hazards, such as the risk of fire and/or health risks if button cells are swallowed. Reduce battery waste as much as possible by using longer-life batteries or rechargeable batteries.
Further information on the recycling of these products can be obtained from your municipal administration, from the municipal collection points, or from your Sennheiser partner. You may also be able to return electrical or electronic equipment to your distributor, if they are legally required to do so. By disposing of your batteries properly, you are helping to protect public health and the environment.
EU Declaration of conformity
- RoHS Directive (2011/65/EU)
- Compliant to Sound Pressure Limits according to country specific requirements.
Hereby, Sennheiser electronic SE & Co. KG declares that the radio equipment type SEBT1* is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: sennheiser.com/download.
*for wireless device only
United Kingdom
|
|
|
|
- RoHS Regulations (2012)
- Radio Equipment Regulations (2017)*
*for wireless device only
Importer: Sennheiser UK Ltd.
Pacific House, Third Avenue, Globe Park, Marlow
Buckinghamshire SL7 1EY, United Kingdom
USA
Statements regarding FCC and ISED
This device complies with Part 15 of the FCC rules, RSS-247 of Innovation, Science and Economic Development Canada (ISED). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Radiofrequency radiation exposure Information
Since the radiated output power of this device is far below the FCC / ISED radio frequency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules and RSS-102 of Innovation, Science and Economic Development Canada (ISED).
This device meets FCC/ ISED RF exposure guidelines for an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC / ISED RF exposure guidelines.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Contact information: Sennheiser Electronic Corporation, 1 Enterprise Drive, Old Lyme, CT 06371; sennheiser.com
FCC ID: DMOSEBT1
Canada
Statements regarding FCC and ISED
This device complies with Part 15 of the FCC rules, RSS-247 of Innovation, Science and Economic Development Canada (ISED). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Radiofrequency radiation exposure Information
Since the radiated output power of this device is far below the FCC / ISED radio frequency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules and RSS-102 of Innovation, Science and Economic Development Canada (ISED).
This device meets FCC/ ISED RF exposure guidelines for an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC / ISED RF exposure guidelines.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
IC: 2099A-SEBT1
CAN ICES-3 (B)/NMB-3(B)
Australia / New Zealand
Japan
Brazil
02663-20-07356
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
India
Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones:
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.
2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operación no deseada.
IFT: RCPSESE20-0353
Thailand
Singapore
South Korea
인증 번호 (Certificate): R-C-SE9-SEBT1
상 호 명 (Applicant): Sennheiser electronic SE & Co. KG
품명 (Product name): 특정소출력 무선기기
모델명 (Model): SEBT1
제조연월 (Date): See serial number label
제조자 (Manufacturer): Sennheiser electronic SE & Co. KG
제조국 (Country of origin): 중국/China
Battery: YU10395-17003
Vietnam
Kể từ ngày 1 tháng 12 năm 2012, các sản phẩm được sản xuất bởi Sennheiser tuân thủ Thông tư 30/2011/TT-BCT quy định về giới hạn cho phép đối với một số chất độc hại trong các sản phẩm điện và điện tử.
China
SEBT1: CMIIT ID: 25J9902U0279
經型式認證合格之低功率射頻電機，非經許可，公 司、商號或使用者均不得擅自變更頻率、加大功率或 變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合 法通信；經發現有干擾現象時，應立即停用，並改善 至無干擾時方得繼續使用。前項合法通信，指依電信 法規定作業之無線電通信。低功率射頻電機須忍受 合法通信或工業、科學及醫療用電波輻射性電機設 備之干擾 。
Taiwan
SEBT1: 
R3A531 RoHS
Chile
SEBT1
Información comercial
Fecha: 29.05.2026
Nombre comercial del equipo: Sennheiser
Fabricante: Sennheiser electronic SE & Co. KG, Am Labor 1, 30900 Wedemark, Germany
Importador o representante en Chile: CMV SECL SPA
Dirección: A Tajamar 481 T Sur Of 2004 SANTIAGO, Santiago, 7550000 Chile
Correo de contacto: operaciones@cmvaudiogroup.com
Sitio web: sennheiser.com/ie-100-pro-wireless
Especificaciones técnicas del equipo
Tipo de producto: Auriculares inalámbricos intraaurales (Bluetooth)
Marca: Sennheiser
Model: SEBT1
Modulación: GFSK, π/4 DQPSK, 8DPSK
Frecuencia de transmisión: 2400 - 2483,5 MHz
Ganancia de la antena: 0 dBi
Potencia de salida: < 10 mW
Módulos: Bluetooth
Datos técnicos: IE PRO BT Connector
Informes de prueba relevantes: FCC RF Exposure Report, FCC 15B Test Report, Photographs of the test configuration, FCC Test Report Bluetooth EDR, FCC Test Report Bluetooth LE
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic SE & Co. KG is under license. Other trademarks and trade names are those of their respective owners.