Home
Instruction manual
Starting up and operating devices of the Evolution Wireless Digital series.
EW-DX EM 4 Dante rack receiver
Buttons for navigating the menu

Instruction manual
Starting up and operating devices of the Evolution Wireless Digital series.
- EW-D EM rack receiver
- EW-D SKM-S handheld transmitter
- EW-D SK bodypack transmitter
- EW-DX EM 2 rack receiver
- EW-DX EM 2 Dante rack receiver
- EW-DX EM 4 Dante rack receiver
  - Product overview
  - Connecting/disconnecting the receiver to/from the power supply system
  - Connecting receivers in a network
  - Connecting receivers in a Dante® network
  - Connecting antennas
  - Outputting audio signals
  - Installing receivers in a rack
    You can install the receiver in any conventional 19" rack. The rack mounting angles are already attached to the device.
  - Switching the receiver on and off
  - Lock-off function
  - Using the headphone output
    You can use the headphone output on the front of the receiver (6.3 mm jack) to listen to the audio signals of the four channels.
  - Meaning of the LEDs
  - Displays on the receiver’s display panel
    Status information such as frequency, reception quality, battery status and audio level is shown on the display.
  - Buttons for navigating the menu
  - Opening the menu and navigating the menu items
  - Menu structure
    The figure shows the complete menu structure in an overview.
  - Setting options in the menu
    In the receiver menu, you can configure the following settings.
  - System menu item
  - Updating the firmware of the receiver
    You can update the receiver firmware using the Sennheiser Control Cockpit software, the Wireless Systems Manager software or the Smart Assist app.
- EW-DX SKM | EW-DX SKM-S handheld transmitter
- EW-DX SK | EW-DX SK 3-PIN bodypack transmitter
- Table stand EW-DX TS 3-pin | EW-DX TS 5-pin
- EW-DP EK portable receiver
- EW-DP SKP plug-on transmitter
- Establishing a radio link | Synchronizing the receiver and transmitter
- L 70 USB charger
- CHG 70N-C charger
  The CHG 70N-C is a network enabled charger featuring two individual charging bays.
- EW-D ASA antenna splitter
- AWM active directional antenna
- Cleaning and maintenance
  Note the following information when cleaning and maintaining products of the Evolution Wireless Digital series.

Buttons for navigating the menu

Use the following buttons to navigate through the receiver’s operating menu.

Press the jog dial

Jumps from the home screen to the operating menu
Calls up a menu item
Changes to a submenu
Saves settings

Turn the jog dial

Selects a standard display (see Displays on the receiver’s display panel)
Changes to the previous or next menu item
Changes the setting of a menu item

Press the ESC button

Cancels the entry and returns to the previous display

Opening the menu and navigating the menu items