FREQUENCY menu item

Under the FREQUENCY menu item, you can manually set the radio frequency independently of the preset channels.

If you are not sure whether the selected frequency is free, we recommend performing a scan to detect all free frequencies: AUTO SCAN menu item.
  1. Open the FREQUENCY menu item.
    The display looks as follows.

  2. Press the UP or DOWN button to set the frequency in the megahertz range.
  3. Press the SET button to select the value and activate fine-tuning of the frequency in the kilohertz range.
  4. Press the UP or DOWN buttons to finely adjust the frequency in the kilohertz range.
  5. Press the SET button to accept the displayed frequency. You will then be returned to the main view or advanced view.
    Or
  6. Press the ESC button to cancel the scan. The previous frequency remains unchanged.
    If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see Establishing a radio link | Synchronizing the receiver and transmitter).