Installing the EW-D ASA in a rack
| NOTICE | |
|---|---|
Rack mounting poses risks!
When installing the device in a closed 19" rack or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical load and the electrical potentials will be different from those of devices which are not mounted into a rack.
Make sure that the ambient temperature within the rack does not exceed the permissible temperature limit stated in the specifications. See (Specifications).
Ensure sufficient ventilation; if necessary, provide additional ventilation.
Make sure that the mechanical load of the rack is even.
When connecting to the power supply system, observe the information indicated on the type plate. Avoid overloading the circuits. If necessary, provide overcurrent protection.
When mounting in a rack, please note that intrinsically harmless leakage currents of the individual power supply units may accumulate, thereby exceeding the permissible limit value. As a remedy, ground the rack via an additional ground connection.
| |
To mount the antenna splitter in a rack, you will need the GA 3 rack mount kit (optional accessory).
Rack mounting is carried out in the same way as for the EW-D EM receiver: see Installing receivers in a rack.