Home
Knowledge base
Central hub for information, resources, and guides with further content on the product and/or service.
Network guide
This document is intended for system integrators and room planners and serves as a planning guide for the network integration of the TeamConnect Bar (TC Bar) in a room.
Network modes
To integrate the TC Bar into an existing network structure and control it, use one of the provided control software from Sennheiser such as Sennheiser Device Hub, the Local Web UI, or Sennheiser Control Cockpit.
Device-dependent network set-up
Depending on the model, the TC Bar offers various options for integrating the device into a network.

Knowledge base
Central hub for information, resources, and guides with further content on the product and/or service.
- Cloud connectivity guide
  This document provides AV /IT professionals with step-by-step guidance on enabling cloud connectivity for Sennheiser devices and preparing them for integration with Sennheiser DeviceHub, Sennheiser's cloud-based device management platform.
- Audio/video application guide
  This guide provides technical guidance for planning, configuring, and operating TeamConnect Bar systems in audio/video conferencing environments.
- Network guide
  This document is intended for system integrators and room planners and serves as a planning guide for the network integration of the TeamConnect Bar (TC Bar) in a room.
  - Requirements
  - Control software
    The TC Bar can be operated and managed through multiple Sennheiser control applications.
  - Network modes
    To integrate the TC Bar into an existing network structure and control it, use one of the provided control software from Sennheiser such as Sennheiser Device Hub, the Local Web UI, or Sennheiser Control Cockpit.
    - Device-dependent network set-up
      Depending on the model, the TC Bar offers various options for integrating the device into a network.
    - Single Domain Mode
      This mode is usually used if you want to use both the controller (Sennheiser or third-party provider) and Dante® on the same physical port with only one available IP in the same network.
    - Dual Domain Mode
      This mode is generally used if you receive a merged flow from two separate networks via a single network line and you want to resolve this merged flow back into two different IP and MAC addresses.
    - Split Mode
      In this mode, the Sennheiser control software and the Dante Controller are located in different networks and both have different IP and MAC addresses. All data packages are untagged.
  - Network availability and extensions
  - Best practice
  - Ports and protocols
  - Trouble shooting
- Cybersecurity white paper
  This white paper aims to provide IT professionals with an in-depth understanding of the TC Bar, its components, and its security features.
- FAQ
  The most frequent questions and answers summarized in a chapter.

Device-dependent network set-up

Depending on the model, the TC Bar offers various options for integrating the device into a network.

The following is an overview for quick orientation of outgoing use cases and for setting up preferred network configurations.

The following network modes are available:

Table 1. Single Domain Mode
Network structure	Description
One network One IP address One network switch	Configure both Dante® and control networks over one switch Use only one IP address for both networks Control both networks over one single network port of the TC Bar

Table 2. Dual Domain Mode
Network structure	Description
Two separated networks (Control and Dante) over one cable Two different IP addresses One network switch	Configure both Dante and control networks over one switch Use two different IPs to address the Control network and the Dante® network separately Control both networks over one single network port of the TC Bar

Table 3. Split Mode
Network structure	Description
Two physically separated networks (Control and Dante) over two different network cables Two different IP addresses One managed network switch or two independent network switches	Configure both Dante® and Control networks over two different switches Use two different IPs to address the Control network and the Dante® network separately Control the Dante® network and the Control network over different ports of the TC Bar