Home
Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
Monitoring & Controlling
The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
DeviceHub
DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
Device
An overview of the device's key features and specifications.

Instruction manual
Detailed description of mounting, commissioning, operation, maintenance, and transport of the product.
- Quick start
  The TC Bar can be connected in just a few steps and used immediately.
- Product Overview
- Mounting
- Start-up the product
  This chapter describes the initial configuration and commissioning of the TC Bar.
- Usage
  The following chapters contain additional information on operating the TC Bar.
- Monitoring & Controlling
  The TC Bar provides comprehensive monitoring and control functions that enable users to efficiently manage audio and video settings across various applications and interfaces.
  - Local Web UI (LUI)
    LUI provides a user-friendly platform for interacting with system functionalities and features.
  - DeviceHub
    DeviceHub is a centralized cloud-based platform designed for monitoring and controlling various devices seamlessly.
    - Get started
      Initial setup steps including registration, organization, user management, and device enrollment preparation.
    - Device enrollment
      Follow the steps to enroll your device to DeviceHub, ensuring proper network connectivity and time configuration.
    - Audio
      The following settings can be managed via the audio tab.
    - Camera
      An overview of camera settings and controls.
    - Device
      An overview of the device's key features and specifications.
      - Updating device firmware
        The installed firmware version for each device is shown in the device list and on the Device detail page.
      - Setting LED brightness
        This setting adjusts the brightness of the LEDs on the TC Bar.
      - Stipulating a device profile for the camera
        Device profiles contain custom or predefined settings for supported conference and collaboration platforms.
      - De-/activating sound prompts
        This function activates or deactivates the integrated sounds when the device is turned on and off and when the TC Bar is connected to or disconnected from other devices.
      - Rebooting the TC Bar
        You can configure the TC Bar using the control panel in Sennheiser’s control software.
      - Activating the HDMI® output
        You can activate the HDMI® output in order to transmit video signals to external screens.
      - Changing energy-saving mode
        Adjust the device's power-saving mode according to your requirements.
    - Network
      The following network settings are available for the TC Bar.
    - Access & Security
      Overview of access and security features.
    - Maintenance
      In this section, you will find the maintenance procedures, along with instructions for configuring NTP servers and managing time synchronization settings on the device.
  - Control Cockpit
    Control Cockpit is a centralized management interface that streamlines the operation and monitoring of audio, video, and control systems from a single user-friendly dashboard.
- Product care
  Fundamental care and maintenance practices to help ensure the longevity and proper functioning of the device.

Device

An overview of the device's key features and specifications.

LED Brightness

Slider for adjusting the LED brightness.

Off: the LEDs are switched off completely
1 ... 5: adjusts the brightness between low (1) and high (5)

Sound Prompts

Activates or deactivates all integrated sounds of the TC Bar with the exception of the welcome prompt.

HDMI output

Activates the HDMI output signal to external display.

If you select "Microsoft Teams" as the “Device Profile”, the HDMI output is deactivated.

Device Profile

Here you can select the desired device profile, which is applied either from your own configured settings or from the predefined settings of the selected conference and collaboration platform.

When changing the device profile, the camera settings will be reset and the device will be restarted.

Custom: own device profile
- Enables all settings in the Camera tab as well as the HDMI output in the Device tab
Microsoft Teams: predefined by Microsoft Teams

Using this profile, the camera zoom of the TC Bar is reduced to comply with Microsoft Teams specification.
- Enables the default settings for Microsoft Teams
- Resets all settings in the Camera tab
- Disables the HDMI output in the Device tab
- Reboots the device
Zoom: predefined by Zoom

Using this profile, the camera zoom of the TC Bar might be changed to comply with Zoom specification.
- Enables the default settings for Zoom
- Resets all settings in the Camera tab
- Reboots the device