Version 1.2.2

CAUTION

Important!

Before starting the update, disconnect the antennas from the Base Station. This ensures a safe, trouble-free firmware update.

Please follow these steps when installing the firmware:
  1. Physically disconnect the antennas from the Base Station.
  2. Update the Base Station (expect several automatic reboots).
  3. Wait until the Base Station LED remains solid green, indicating that the update has been completed.
  4. Reconnect the antennas; they will update automatically.
  5. Update your mobile devices.
  6. Avoid power interruptions, and ensure that batteries are sufficiently charged.

New features

Base Station
  • Audio link modes can be empty, while selecting the audio inputs and outputs (Audio IO) in the WebUI
SEK
  • The status LED is flashing red when the battery state is below 10 %
  • In-Ear volume level and battery state are displayed on the home screen
Spectera WebUI
  • Support to select Audio IO without setting an Audio Link Mode first
  • The battery icon for the SEK is flashing red when the battery state is below 10 %

Improvements

SEK
  • Supports low impedance headphones
Spectera WebUI
  • LQI level 1 is now correctly shown when the link output is muted

Implementation of Dante® Media Encryption

Dante Media Encryption protects the content of media flows across thousands of existing Dante devices using strong AES-256 encryption, safeguarding media from interception or unauthorized access.

To update the Dante modul of the Base Station, please refer to: https://www.getdante.com/support/faq/how-to-update-your-dante-devices/

Bug fix

SEK
  • Serial number is shown to be "0000000000" if a connected SEK has a FW mismatch
Spectera WebUI
  • Fixed incorrect network state when setting IP mode to "manual" and gateway to "0.0.0.0"

Known issues

Base Station
  • Sometimes Base Station reboots are encountered, if HF channels are muted over the Base Station UI (i.e. from the front panel of the Base Station)
SEK
  • MIC/Line input - noise may occure in the audio signal when instrument cables and microphones have insufficient shielding
Spectera WebUI
  • Under certain circumstances, the identify function in the WebUI keeps flashing and does not automatically stop after 10 seconds.