Instruction manual
Starting up and operating devices of the 2000 IEM series.
- Stereo diversity receiver EK 2000 IEM
- Stereo transmitter SR 2000 IEM | SR 2050 IEM
  - Product overview
  - Connecting/disconnecting the transmitter with/from the power supply
  - Creating a data network
    You can monitor and control one or more SR 2000 IEM / SR 2050 IEM transmitters via a network connection using Sennheiser Wireless Systems Manager (WSM) software.
  - Connecting audio signals
    You can connect Mono or Stereo signals via the two input sockets BAL AF IN L(I) and BAL AF IN R(II).
  - Daisy chaining audio signals
  - Connecting antennas
  - Mounting the transmitter into a rack
  - Switching the transmitter on and off
  - Using the headphone output
  - Configuring the audio channels (mono/stereo)
  - Deactivating the RF signal (RF mute)
  - Lock-off function
  - Displays on the transmitter display panel
    You can view the following information on the transmitter display.
  - Buttons for navigating the transmitter menu
    Navigating through the menu
  - Setting options in the menu
    In the SR 2000 IEM / SR 2050 IEM menu, you can configure the following settings.
- Antenna Combiner AC 3200-II
- Establishing a radio link
- Synchronizing devices
  You can synchronize the 2000 IEM series transmitters and receivers via the transmitter’s and receiver’s infrared interfaces.
- Cleaning and maintenance

Using the headphone output

You can use the headphone output on the front of the SR 2000 IEM / SR 2050 IEM (6.3 mm jack) to listen to the audio signal.

WARNING

Danger due to high volume levels

Volume levels that are too high may damage your hearing.

Turn down the volume of the headphone output before you put on the headphone.

Connect the headphone to the headphone socket.
Control the volume by turning the volume control next to the headphone socket.