Resetting the device password
You can reset the assigned device password on your Base Station to its factory settings.
To change or reset the device password, the device must be reset to factory
settings.
| NOTICE | |
|---|---|
Data loss during the factory reset
All audio devices will be unpaired and all audio routes will be deleted.
All settings (including the device password) are reset to the default values. The license remains activated.
After the reset, the device is restarted automatically.
Do not reset the Base Station during an active live audio transmission.
| |
To reset the password to factory settings, you have two options available:
- Reset via the device (see below)
- Reset via the WebUI interface (see Resetting the Base Station)
To reset the Base Station to its factory default settings using the
device:
- On the Base Station, rotate the jog-dial and navigate to the menu Reset.
-
Press the jog-dial to enter the menu.
A warning will appear.
- Rotate the jog-dial to Reset.
-
Press the jog-dial again.
The Base Station will be set back to factory settings and reboot.After rebooting, check the IP address as it may have changed.