Home
User manual
Detailed description of the start-up and operation of your selected hardware and software product.
LinkDesk
Detailed description of the installation, start-up and operation of the LinkDesk software.
Routing Editor
The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
Defining audio routes
With the routing editor, you can easily route the audio of your connected devices and monitor the capacity impact.

User manual
Detailed description of the start-up and operation of your selected hardware and software product.
- Network & Security Guide
  This document is intended for IT administrators, system integrators and event technicians and serves as an planning and configuration guide for integrating components of the Spectera offering into diverse network environments from small home networks up to enterprise networks.
- Spectera
  Detailed description of the start-up and operation of your selected hardware.
- WebUI
  Detailed description of the WebUI navigation and configuration.
- LinkDesk
  Detailed description of the installation, start-up and operation of the LinkDesk software.
  - Get started
  - Basic configuration
    Start your basic configuration with the recommended steps.
  - Productions
    In this chapter you will learn the basic information about productions.
  - Base Station
    The Base Station is the central hardware for managing and monitoring all compatible Spectera products.
  - Mobile devices
  - Routing Editor
    The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
    - Defining audio routes
      With the routing editor, you can easily route the audio of your connected devices and monitor the capacity impact.
    - Removing audio routes
      You can remove defined audio routes from the routing editor.
  - Error handling
    Summary of the typical error messages that can occur and how to resolve them.

Defining audio routes

With the routing editor, you can easily route the audio of your connected devices and monitor the capacity impact.

The following settings must be made to route the audio:

Select the affected input or output
Select a suitable audio link mode
Select the audio type
Assign the audio link number

To select the setting for your IEM or MIC channel:

Under MOBILE DEVICES click on IEM or MIC.
The channel has been selected.

To select the Audio Link Mode:

Navigate to the row of the mobile device to be configured and select the desired mode in the Audio link mode column.

Depending on the selected mode, the capacity utilization of the HF channel will be adapted and the influence on important parameters will be shown.

The Audio Link mode has been selected.

NOTICE

This action will reset the audio channel assignment and audio link mode for this device

The Audio might be interrupted.

Make sure that no live audio is being used.

Navigate to the row of the mobile device to be configured and select the desired mode in the Type column.
The audio type has been selected.

To assign the audio link:

Navigate to the row of the mobile device to be routed and select the desired link in the numbering column.
The audio link has been assigned.

The Audio links have been routed.