Home
User manual
Detailed description of the installation, start-up and operation of the LinkDesk software.
Basic configuration
Start your basic configuration with the recommended steps.

User manual
Detailed description of the installation, start-up and operation of the LinkDesk software.
- Get started
- Basic configuration
  Start your basic configuration with the recommended steps.
  - Creating new productions
    With productions, you can create a virtual workplace to plan, manage and monitor your real devices for the upcoming event.
  - Adding Base Stations
    The networked Base Station can be added to the software using an IP address.
  - Activating antennas
    Antennas connected to a Base Station must be selected and activated before use.
  - Scanning RF spectrum
    You can use an RF scan to examine the current frequency situation of your connected antenna.
  - Adding RF channels
    You can configure an RF channel and assign it to the available devices.
  - Pairing/unpairing mobile devices
    In LinkDesk you can pair up to 128 mobile devices to a Base Station within one RF channel.
- Productions
  In this chapter you will learn the basic information about productions.
- Base Station
  The Base Station is the central hardware for managing and monitoring all compatible Spectera products.
- Mobile devices
- Routing Editor
  The editor serves as a basic configurator for mobile devices and also provides an overview of all connected devices with their total capacity utilization within an RF spectrum.
- Error handling
  Summary of the typical error messages that can occur and how to resolve them.

Basic configuration

Start your basic configuration with the recommended steps.

For an initial setup, we recommend following these first steps to successfully configure the system from the start: