Home
Instruction manual
Starting up and operating devices of the Digital 6000 line.
SK 6000 bodypack transmitter
These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
Connecting an instrument or line source
You can connect instruments or audio sources with a line level to the SK 6000 bodypack transmitter.

Instruction manual
Starting up and operating devices of the Digital 6000 line.
- EM 6000 2-channel receiver
  These sections contain information about installing, starting up and operating the EM 6000 2-channel receiver.
- SKM 6000 handheld transmitter
  These sections contain information about installing, starting up and operating the SKM 6000 handheld transmitter.
- SK 6000 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6000 bodypack transmitter.
  - Product overview
  - Inserting and removing the BA 61 rechargeable battery
  - Inserting and removing the B 61 battery compartment
  - Mounting the antenna
  - Connecting a microphone
  - Connecting an instrument or line source
    You can connect instruments or audio sources with a line level to the SK 6000 bodypack transmitter.
  - KA 9000 COM command adapter
  - Switching the SK 6000 on and off
  - Displays on the SK 6000 bodypack transmitter display panel
    You can view the following information on the transmitter display.
  - Operating the menu of the SK 6000 bodypack transmitter
    Navigating through the menu and making changes.
  - Operating the SK 6000 with the KA 9000 COM command adapter
    You can use the KA 9000 COM command adapter to switch the audio channel on the EM 6000 receiver via remote control.
  - Updating the transmitter firmware
- SK 6212 bodypack transmitter
  These sections contain information about installing, starting up and operating the SK 6212 bodypack transmitter.
- Modular L 6000 charger
  These sections contain information about installing, starting up and operating the modular L 6000 charger and the corresponding charging modules.
- L 70 USB charger
- Establishing a radio link
  Note the following points when you establish a radio link between the transmitter and receiver.
- Synchronizing devices
- Cleaning and maintenance
  Note the following information when cleaning and maintaining Digital 6000 series products.

Connecting an instrument or line source

You can connect instruments or audio sources with a line level to the SK 6000 bodypack transmitter.

To do so, you require the Sennheiser CI 1-4 cable (6.3 mm (1/4") jack plug to 3-pin audio connector)

To connect an instrument or line source to bodypack transmitter:

Connect the 3-pin audio connector of the CI 1-4 cable to the SK 6000 bodypack transmitter audio socket as shown in the figure.
Tightly screw on the audio cable coupling ring on the audio socket thread of the SK 6000 bodypack transmitter.